RSE is available from USP for routine use. Most BET assays are performed using a CSE, which is a secondary calibration analyte and is provided as lyophilized preparations of a purified LPS. CSE is widely used in test for confirmation of labeled lysate sensitivity, interfering factors, routine tests and positive control.
For research use only. Not for use in diagnostic procedures.
| Catalog No. | Description & Kit Contents | Specifications / Pack Size |
| CSE10A | Control Standard Endotoxin | 1-99/Ampoule，10 Ampoules/Pack |
| CSE10V | Control Standard Endotoxin | 1-199/Vial，10 Vials/Pack |
The sensitivity of Lyophilized Amebocyte Lysate and potency of Control Standard Endotoxin are assayed against USP Reference Standard Endotoxin. The Lyophilized Amebocyte Lysate reagent kits come with product instruction, Certificate of Analysis, MSDS.
Note: For other sizes/specifications not listed above, please contact our customer service team.
Email: Eve@bioendo.com
Tel: +86 18065928551
RELATED EQUIPMENT
Compatible Endotoxin Detection Systems
Compatible instruments support different endotoxin detection workflows, from routine laboratory testing to fully automated analysis.
PRODUCT
DESCRIPTION
Full Wavelength Absorption Light Bacterial Endotoxin Detector
Fluorescent Endotoxin Detection Instrument
Multifunctional Endotoxin Detector
Bacterial Endotoxin Detector
Intelligent Fully-Automatic Endotoxin Detection System
Phoenix Q9
Intelligent Fully-Automatic Endotoxin Detection System
Modular Intelligent Fully-Automatic Endotoxin Detection System
Bacterial Endotoxin Standard
Purpose
Used for sensitivity verification, interference testing, and the preparation of various positive controls in tests involving limulus reagents.
Procedure
1.
Dissolution: Add 1 mL of water for bacterial endotoxin testing. After reconstitution, mix thoroughly on a vortex mixer for 15 minutes.
2.
Dilution: Use water for bacterial endotoxin testing to prepare bacterial endotoxin standard solutions at the desired concentrations (e.g., 2.0λ, λ, 0.5λ, 0.25λ, etc.). Mix on a vortex mixer for 30 seconds after each dilution.
Precaution
1.
1 EU/mL endotoxin solution can be used to prepare a series of endotoxin solutions of varying concentrations by diluting the endotoxin in a 1:1 ratio; the diluted endotoxin must be used within 4 hours.
Click the product name to view product details.